Infiniti QX60 HYBRID Dismantling Manual

31, 13. Disconnect negative (-) battery cable and cover it with insulated tape. 14. Perform the dismantling operation. Refer to 6. Dismantling Information (DG–41). 3-4.2 Cutting the Vehicle Body • Do not cut into high voltage related areas to avoid severe personal injury or death. • D…

16, • The high voltage battery relays (SMR1 and SMR2) will automatically open to stop the electrical flow in a front, side or certain rear collisions that are sufficient enough to activate the supplemental restraint system (SRS). 2-6 High Voltage Circuit Shut-Off System This vehicle …

49, 28. Disconnect inverter harness connector (A) from Li-ion battery. Touching high voltage components without wearing appropriate Personal Protective Equipment (PPE) will cause electrocution. 29. Remove gas vent hose (1) from floor panel. Touching high voltage components without wearing ap…

2, Infiniti QX60 HYBRID Foreword This manual describes dismantling operations and important safety related warnings and cautions for this vehicle. This vehicle is equipped with a high voltage Lithium-ion (Li-ion) battery pack. Failure to follow recommended practices during dismantling will cause death or se…

39, 5. Storing the Vehicle The service plug must be removed to shut down the high voltage system for storage. Do not store a vehicle inside a structure. Keep the vehicle away from other vehicles if the li-ion battery is severely damaged. There is possibility of delayed fire from a severely damaged…

34, 3-4.3 Water Submersion Damage level of submerged vehicle may not be apparent. Handling a submerged vehicle without appropriate Personal Protective Equipment (PPE) will result in serious injury or death from electrical shock. • The ignition switch of the submerged vehicle must be turned OFF …