Intergraph InterServe 80 SL Manual, System Setup

79, 65 6 Troubleshooting Use this chapter to identify and resolve common system problems of the base unit. Checking the System................................................................................................... 66 System Power..........................................................…

63, 49 Server Monitor, DMA Select This parameter reserves a DMA for the ISM card. The default is DMA 6, and other options are DMA 0, DMA 1, DMA 3, DMA 5, and DMA 7. Server Monitor, IRQ Select This parameter reserves an IRQ for the ISM card. The default is IRQ 5, and other options are IRQ 7, IRQ 10, IR…

21, Intergraph InterServe 80 SL 7 2. Connect one end of the external SCSI cable to the external SCSI port. − The standard Ultra SCSI port is located just under the AC Line Out connector. − The optional Wide Ultra SCSI port is located on the right side of the I/O panel. 3. Connect the other end of the cable to the SCSI de…

47, 33 4 Operating Notes This chapter contains important, basic information on using the InterServe 80. See the online System Introduction delivered with the system for details on features and functions. Moving the System ............................................................................…

20, 6 Connecting 1 to 4 Drives SCSI-1 Fast SCSI-2 Ultra SCSI Wide Ultra SCSI 19.8 ft (6 meters) 9.9 ft (3 meters) 9.9 ft (3 meters) 9.9 ft (3 meters) Connecting 5 to 7 Drives SCSI-1 Fast SCSI-2 Ultra SCSI Wide Ultra SCSI 9.9 ft (3 meters) 9.9 ft (3 meters) 4.5 ft (1.5 meters) 4.5 ft (1.5 meters) NOTE…

82, 68 ERROR - Series of beeps and error messages display. Message Explanation and Solution Base 64 KB Memory Error Memory failure in the first 64 KB. Remove and reinstall the DIMM(s). If error persists, replace the DIMM(s). Timer Not Operational Memory failure in the first 64 KB, or Tim…