Ipevo IS-01 Operation & User’s Manual

16, 14 IPEVO Annotator Software (cont’d) Click the Computer icon to select Desktop Mode Desktop Mode Display a touchscreen keyboard Save part of your current screen as an image Hide the toolbar For more specic instructions, click the Settings icon Clicking the small reverse arrow on eithe…

15, 13 Using IPEVO Annotator Software IS-01 comes with IPEVO Annotator, a program which can be used in combination with any other software/application. You can draw, write and annotate onto images on the screen. Or, you can create a blank whiteboard to turn your projector screen into an interactive …

20, © 2013 IPEVO Inc. All rights reserved. IPEVO, IPEVO Annotator, IS-01, the IPEVO logo,and other IPEVO marks are owned by IPEVO Inc. and may be registered. All other trademarks are the property of their respective owners. Customer Service (International) Email: [email protected] Tel: +886…

10, 8 3. Ensure the mounting surface is clean and free of grit. Remove the sticker from the bottom of the ceiling mount, and afx the ceiling mount rmly onto the mounting surface. Note: The sticker of Ceiling Mount is extremely adhesive and should only be applied once.…

18, Ipevo IS-01 16 FAQ How do I quickly determine a good working distance between the screen and Sensor? Normally, the projector is a good location to place the Sensor. If you are using a short-throw projector, however, please refer to pages 5 and 6 for the recom mended Sensor distance guideline…