iPod IWIP3G - IWRAP - IPHONE 3G Operation & User’s Manual

149, 149 7.9 SYNTAX ERROR SYNTAX ERROR is not an actual event, but an error message describing a faulty typed command or an error in command parameters. 7.9.1 Syntax Synopsis: SYNTAX ERROR …

25, 25 Command: iWRAP version: HW version: Short description CONTROL AUTOCALL iWRAP 2.1.0 WT12, WT11, WT32 Manage automatic call CONTROL BAUD iWRAP 2.1.0 WT12, WT11, WT32 Change UART baud rate CONTROL BIND iWRAP 2.2.0 WT12, WT11, WT32 Manage GPIO bindings CONTROL CD iW…

198, iPod IWIP3G - IWRAP - IPHONE 3G 198 12.9 A2DP Sink This example shows how to set up iWRAP into A2DP source mode i.e. to audio transmitter. In this mode iWRAP can open Bluetooth A2DP connections to A2DP sink(s) or receive connections from them. The basic configuration steps are displayed in the figure below: A …

55, 55 5.16 RFCOMM Command RFCOMM is used to create a RFCOMM channel for general RFCOMM connections. 5.16.1 Syntax Synopsis: RFCOMM {action} Description: action CREATE Creates a generic RFCOMM channel. Response: RFCOMM {channel} channel RFCOMM channel number Events: N…

121, 121 //HOW TO CREATE A SIMPLE FRAME char outbuf[128]; //Buffer for frame char* cmd = “SET”; //ASCII command int link = 0xff, pos=0; //0xFF for control channel int len = strlen(cmd); //Calc. length of ASCII command //Generate packet outbuf[pos++]=0xbf; //SOF out…