iPort CM-IW2000 Instruction Manual

3, iPort CM-IW2000 CM-IW2000 Instruction Manual 3 Installation Preparation The CM-IW2000 features an integral Roto-Lock ® mounting system for quick mounting directly into existing walls. Once the hole is cut and the cables have been run, you can install the iPort into the wall in a matter …

2, CM-IW2000 Instruction Manual 2 Introduction The iPort ® Control Mount is an in-wall mounting platform system that allows an iPad ® to become an integral part of your home control system through wireless applications. Before installing and using the CM-IW2000, please read and f…

6, 6 CM-IW2000 Instruction Manual Removal 1. Ensure that the CM2000 bezel is not bonded with the wall paint. If it has, gently place a plastic putty knife under the frame on all sides to ensure the frame doesn’t peel the wall paint while being removed. 2. Attach the iPort suction cup…

5, CM-IW2000 Instruction Manual 5 9. Attach safety lanyard on top center screw of retainer assembly as shown in gure 7. 10. Install pre-assembled circuit board assembly into the iPad dock connector on end of iPad. Metal circuit board bracket will slide under thumb screws on the retainer. …

7, CM-IW2000 Instruction Manual 7 Specifications Power supply: 15V DC, regulated Dimensions (W x H x D): 11.60” x 9.51” x 2.36” (294.6mm x 241.6mm x 59.9mm) Cut-out Dimensions (W x H): 10.75” x 8.65” (273.1mm x 219.7mm) 11.60in 294.6mm 9.51in 241.6mm 1.49in 38mm 2.36in 59.9mm 0.…