iRobot Roomba Owner's Manual

26, 26 iRobot Roomba 600 Series 3 Install Roomba’s faceplate by inserting the tabs into the appropriate slots, and then pushing down firmly on the inside and outsides edges of the faceplate. 4 Reinsert Roomba’s bin. …

25, For more detailed information, visit: www.irobot.com 25 Faceplate Removal Follow these instructions to remove and install Roomba’s faceplate. 1 Remove Roomba’s bin. 2 Remove Roomba’s faceplate by pulling up from the bin. The faceplate is secured in several places. …

9, For more detailed information, visit: www.irobot.com 9 Cleaning System Roomba features a patented three-stage cleaning system. Floor Surfaces Roomba works on wood, carpet, tile, vinyl, and linoleum, and adjusts automatically to different floor types. Roomba automatically senses stairs an…

28, 28 iRobot Roomba 600 Series 3 Unscrew the four screws shown below and remove Roomba’s bottom cover. 4 Remove Roomba’s battery. 5 Reinstall Roomba’s battery with the iRobot logo facing up. 6 Replace Roomba’s bottom cover and the four screws. 7 Replace Roo…

20, iRobot Roomba 20 iRobot Roomba 600 Series Clean Roomba’s front wheel 1 Pull firmly on Roomba’s front wheel to remove it from the robot. 2 Remove debris from inside the front wheel cavity. 3 Remove the front wheel from its housing and clear any hair wrapped around the axle. Push …

23, For more detailed information, visit: www.irobot.com 23 TIP: To reset Roomba’s software, simultaneously hold down the two buttons above and below CLEAN for 10 seconds. This will clear all scheduled cleaning times, reset the clock and may resolve some software issues. Roomba blinks... Roomba…