iso-9001 Wireless Bridge Operation & User’s Manual

8, Figure 2-3 Setup of LAN connections for this product Note: If an UPLINK port is not available, simply connect a cross-over Ethernet cable from the AP to the switch/hub. 4. Connect this Product to the Printer Use the printer cable to connect the printer to the printer port of thi…

26, this product is 192.168.123.254. So please use 192.168.123.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. 12. In the Gateway and DNS tab, do not put anything. 13. Click OK button to finish the TCP/IP setting and restart the computer. …

21, Chapter 7 Software Installation 1. Insert the installation CD-ROM into the CD-ROM device. The following window will be shown automatically. If it isn’t, please run “install.exe” in the CD-ROM. 2. Click the INSTALL button. Wait until the following Welcome dialogue appears, …

1, 2-Port Wireless Bridge/AP with Print Server User Guide FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec…

10, When this device is printing, there may appear a “Kill Job” button on the Sidenote column. You can click this button to cancel the current printing job manually. 3.3 Tool Box This option enables you to change the administrator password. There are some useful buttons in this page: …

13, iso-9001 Wireless Bridge Association control Check "Association control" to enable the controlling of which wireless client can associate to the wireless LAN. If a client is denied to associate to the wireless LAN, it means the client can't send or receive any data via this device. Choose "allow…