JAI CV-A70 CL Operation Manual

8, CV-A10 CL and CV-A70 CL 5.3.5. Camera Link interface The video output is Camera Link with 10 or 8 bit video placed in a base configuration. The digital output signals follow the Camera Link standardized multiplexed signal output interface. The Camera Link output driver is NS type D…

7, CV-A10 CL and CV-A70 CL 5.3. Input and output circuits In the following schematic diagrams the input and output circuits for video and timing signals are shown. 5.3.1. Iris video output This signal can be used for lens iris control GND 75 Video Output 10k GND 75 Video Output 10k in Contin…

15, CV-A10 CL and CV-A70 CL 1 clk period = 27.7 ns Fig. 20. HD to LVAL timing for ext. synchronization 1 HD or LVAL period = 26.7 µs Fig. 21. Ext. VD/HD to int. FVAL/LVAL phase relations 1 clk period = 27.7 ns Fig. 22. Ext. HD to int. LVAL phase relations 6.3.2. Input…

27, JAI CV-A70 CL CV-A10 CL and CV-A70 CL 6.7. Save and Load Functions. The following commands are for store and load camera settings in the camera EEPROM. Load settings. LD. This command will load previous stored settings to the camera. 3 user settings can be stored in the camera EEPROM. 1 factory setting…

30, CV-A10 CL and CV-A70 CL 7.3. CV-A10CL/A70CL command list Command Name Format Parameter Remarks A – General settings and useful commands EB Echo Back EB= [Param.]<CR><LF> 0=Echo off 1=Echo on Off at power up ST Camera Status request ST?<CR><LF>…

3, CV-A10 CL and CV-A70 CL Table of Contents 1. General......................................................................................................... 2 2. Standard Composition ....................................................................................... 2 3. Main Features ..…