Janome Sewing Machine Manual, Instruction Book

31, 29 SECTION VII. CARE OF YOUR MACHINE Replacing the Light Bulb NOTE: * Unplug the machine. * Do not dismantle the machine other than as explained in this section. * Do not store the machine in a high-humidity area, near a heat radiator, or in direct sunlight. * Clean the outside of the…

13, 11 Threading the Machine * Raise the thread take-up lever to its highest position by turning the handwheel counterclockwise. * Raise the presser foot lifter. * Place a spool on the spool pin, with the thread coming off the back of spool (refer to page 18). z Draw the end of the threa…

10, 8 Bobbin Winding Setting the spool pin Insert the spool pin into the hole as shown. q Spool pin w Hole Setting the spool Place a spool of thread on the spool pin with the thread coming off the back of spool as illustrated. A: Press the large spool holder q firmly against the spool…

15, 13 Adjust the Needle Thread Tension for a Zigzag Stitch For an ideal zigzag stitch, the bobbin thread does not show on the right side (Top side) of the fabric, and the needle thread shows slightly on the wrong side (Bottom side) of the fabric. See the illustrations for the correct appearance. To ma…

29, 27 Serging Machine setting q Stitch selector: G w Stitch length: S.S. e Needle thread tension: 3 – 7 r Presser foot: Zigzag foot A This stitch is ideal for 1/4˝ (0.6 cm) seams on knits or on medium to heavy weight woven fabrics where you want a narrow seam. It is also great for sewing s…