Joemeek SC4 Operation & User’s Manual

12, Joemeek SC4 SC4 M&S DAD Stereo Compressor - User's guide SC4 12 TECHNICAL SPECIFICATION ANALOGUE SIGNAL PATH INPUTS : XLR connectors. Floating electronic balanced inputs 20Kohm impedance. INSERT : unbalanced 1/4 inch jack.10Kohm nominal -10dB, source impedance 400 ohms. OUTPUTS : Main analo…

1, C O M P R E S S I O N Stereo Compressor SC4 STEREO COMPRESSION, PERFECT STEREO IMAGING, DIGITAL AND ANALOGUE FLEXIBILITY User's Guide - The SC4 Stereo Compressor delivers perfect stereo imaging and control, classic JOEMEEK sound, and complete analogue and digital flexibility to re…

9, SC4 M&S DAD Stereo Compressor - User's guide SC4 9 CONTROLS AND INDICATORS INPUT GAIN CONTROL is a rotary pot controlling the gain of both the analogue and the digital inputs to the compressor. The range of the control is from fully off, to a system gain of 18dB (with the…

3, SC4 M&S DAD Stereo Compressor - User's guide SC4 3 JOEMEEK STEREO COMPRESSOR SC4 OVERVIEW THE SC4 .... A NEW STANDARD In 1994 the first Joemeek stereo compressors were introduced to a few discerning producers and studios in London and New York. They were an immediate success and…

8, SC4 M&S DAD Stereo Compressor - User's guide SC4 8 Consequently, this additional clarity is missing and the whole effect is one of muddy deadness.Some historic compressors from the 1950s were used creatively by Joe Meek and other notable engineers of the past. They achieved some of…

5, SC4 M&S DAD Stereo Compressor - User's guide SC4 5 A detented output gain control is calibrated to give 6dB gain in hand and the MS signal is then decoded back into stereo left and right. The analogue output stage gives balanced outputs via XLR connectors. 2) THE DIGITAL INTERFACES (…