JUKI ACF-172-1790 Instruction Manual

129, JUKI ACF-172-1790 128 5-2. DISPLAYING VERSION INFORMATION ① Display the version information screen. When MODE key is held pressed for three seconds, VERSION INFORMATION button (A) is displayed on the screen. The version information on the sewing machine you use is displayed on the v…

90, 89 3-1-2 Performing communication by using the smart media [ Setting procedure ] hen the upper side cover located on the side of the operation panel is opened, there is the inserting opening for smart media card. Put the contact part of the card to the front side and inser…

117, 116 4. ERROR CODE LIST Error code Description of error How to recover Place of recovery Ｅ００１ Contact of initialization of EEP-ROM of MAIN CONTROL p.c.b. When data is not written in EEP-ROM or data is broken, data is automatically initialized and th…

43, 42 ⑤ Select the 1st bar-tacking shape. Select the shape you desire to sew from among 5 kinds of the 1st bar-tacking shape buttons (F). When it is selected, the total sewing shape in which the 1st bar-tacking shape is used is displayed. ⑥ Select the sewin…

28, 27 1-9. Copying ACF pattern The data of ACF pattern No. which has been already registered can be copied to ACF pattern No. which has not been registered. Overwriting copy of the pattern is prohibited. When you desire to overwrite, perform it after deleting the patter…

83, 82 NO. Item Setting range Edit unit Initial display Presser size length (Type 5) When type 5 of Kind of presser is set, input the length of the presser. 10.0～120.0 0.5mm 10.0mm Sewing start position (Feed direction) Sewing start position in terms of presser i…