Jura Impressa F9 guide Quick Reference Manual

1, Jura Impressa F9 guide Sensor-Touch Display Right Control Buttons Hot Water Steam Left Control Buttons RINSE 2 Cup Ground Coffee ON/OFF 1 Cup PROGRAM SELECT PRODUCT ST@RT Big Cup Coffee Espresso Mild Normal Strong Impressa F9 Quick Reference Guide This Guide does not replace the Opera…

2, C) Factory Settings ....................... D) Grinding and Brewing Coffee Nine coffee options in the Sensor Touch Display: BIG CUP, COFFEE, ESPRESSO each in MILD, NORMAL, STRONG. • Select a coffee option and gently touch and hold ST@RT for two seconds until grinding starts. T wo …

3, Push and hold the P button until two Red Arrows show in the display. First message: FILTER NO. Repeatedly pushing the right arrow accesses different factory settings. Push the P button again to return to SELECT PRODUCT. Here is how to change some of the settings (for all other set…

4, J ) Installing the Claris Cartridge (F9 is on) 1. Rinse cartridge under running water and insert into water tank reception. Close cartridge holder. 2. Fill tank with cold water. Push and hold the P button: FILTER NO. Touch ST@RT. NO starts blinking. 3. Touch red arrow once: FILTER YES. T…

5, Important: If you use the Claris filter and the above m essage appears then the Claris activation was not performed. Repeat all steps of Chapter J. This will turn off the decalcifying monitor. Important: Never interrupt the decalcifying program. • Use only the special decalcifying tablets (n…

6, O) Using the frothXpress PLUS system The frothXpress PLUS is separately available for the F9.This system siphons milk and automatically produces preprogrammed amounts of hot frothed or hot steamed milk right into your cups, never wasting any milk! 1. Disconnect the Dual- Frother PLUS from th…