jWIN JX-CD7100 Operation & User’s Manual

2, jWIN JX-CD7100 2 TABLE OF CONTENTS This instruction manual is important to you. Please read it. This manual tells excatly how to connect, operate and adjust this unit for best performance. It shows simple things to do and check before you call for help and saves the cost of unnecessary service and call out ch…

1, 1 WARNING To prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to present blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS 1.…

9, 9 FOR REPEAT PLAY OF ALL THE TRACKS Press the Memory Up/Repeat button twice. The REPEAT will be displayed. Select the desired track by pressing the Tuning/Search Forward or REW buttons. The selected track will be shown on the CD display. Press the PLAY/PAUSE button. The disc will then…

10, 10 NOTES: If the PLAY/PAUSE Button is pressed before the Memory/Program Button is pressed to store a track, the track will not be programmed, and the disc will start playing from the first selected track. Any track can be programmed to play more than one. Repeatedly pressing the M…

5, 5 REMOTE CONTROL AND BATTERY INSTALLATION BATTERY Insert 2pcs [AAA[ size (Alkaline) batteries (not included) into the battery compartment of the remote control. Be sure to observe the polarity markings which are engraved inside the battery compartment, then close the cover. BATTERY REPLACEMENT When…

8, 8 Play a new disc. If the CD player operates normally, the skipping problem is probably due to a defective disc. TO STOP A CD PART WAY THROUGH Press the Stop/Band button. Disc play will show the total number of tracks. To temporarily stop disc play(pause mode),press the PLAY/PAUSE button. Di…