Ken A Vision T-1922C Instruction Manual

5, 5 Operation The NiMH batteries of your microscope need to be charged. Plug in the round pin adapter from the supplied battery charger (or a Ken-A- Vision Multicharger SCGN06) into the back of your microscope. Connect the opposite end to an electrical outlet. Charge the unit overnight (approximat…

6, 6 Note - In the T-1924C, be sure that the floating stage is centered directly over the sub-stage illuminator, so light comes through. - The floating stage can actually cover up the sub-stage illuminator so no light comes through. Place a specimen slide on the stage of the microsco…

3, 3 Specifications subject to change without notice 1. Seidentopf Binocular Head 2. Eyepiece Tubes 3. Bridge Assembly 4. Bridge Assembly Head Socket 5. Fine & Coarse Focusing 6. Stage 7. Microscope L …

2, Ken A Vision T-1922C 2 Thank you for purchasing a Cordless Comparison Scope. Packing List Dust Cover Instruction Manual Power Supply / Charger Warranty Card & Sheet Allen Wrench Application The Ken-A-Vision Cordless Comparison Scope is a use…

7, 7 Seidentopf Binocular Head The Cordless Comparison Scope has two eyepieces with a diopter on one eyepiece to compensate for differential visual acuity between an individual's eyes. The Seidentopf binocular head allows adjustment for interpupillary (interocular) adjustment. The eyepieces…

4, 4 Microscope Preparation and Assembly Step 1. Open packing boxes carefully. There will be two large boxes, each containing a microscope base, and two smaller, one with the bridge assembly and one with the Seidentopf binocular head that fits onto the bridge. Lift each microscope bas…