Kenko Skymemo RS Instruction Manual

5, 3.Placing a camera Loosen the camera rotation clamps slightly and turn the camera mount to install the camera. The flexibility of layout adjustment increases when a ball-head, etc., is used. Fig. 4 If a lens with a tripod mount ring is used, remember to use the tripod mount ring of the lens unl…

7, Polar alignment 1.What the polar alignment is Polar finder reticle for both the Northern and Southern Hemispheres Stars rise from the east and set in the west every day. This is due to a phenomenon called “diurnal motion,” which results from the rotation of the earth. The center of this mo…

6, Kenko Skymemo RS 5.Adjusting the polar axis Follow the instructions on the battery case to install the batteries correctly, and insert the plug on the cable into the power socket on the Skymemo RS. The LED on the tracker should turn on and the motor should actuate. Screw the reticle illuminator into the pol…

8, 3.Polar alignment in the Northern Hemisphere Position of Equatorial Telescope Introduction of Reference Stars First, install the tripod so that one of its legs faces the North Star, and install the Skymemo RS with its polar axis oriented roughly toward the North Star. Next, adjust the orientati…

4, Setup First, confirm that the DIRECTION switch on the main panel is set to the correct position. S indicates the Southern Hemisphere, while N represents the Northern Hemisphere. Next, confirm that the SUN/MOON/FIXED STAR mode selector switch is set to the correct position. 1.Securing t…