Keys Fitness KPS-LP2 Owner's Manual

14, Keys Fitness KPS-LP2 REF# KEYS PART# DESCRIPTION QTY. 1 223-00249 Main Frame 1 2 219-00280 Right Handle 1 3 219-00285 Left Handle 1 4 223-00250 Front Rocker 1 5 223-00251 Back Rocker 1 6 219-00282 Connect Frame 1 7 223-00252 Footplate 1 8 223-00253 Cross Base 1 9 219-00283 Back Pad Support 1 10 219-002…

9, Assembly 9 Step 3 Attach Cross Base (8) to Main Frame (1) using Plate (14), two Bolts (39), four Washers (43), and two Nylon Lock-nuts (42). Slide Pulley Block (10) onto the Cross Base (8) and secure in place using two Bolts (40), four Washers (43), and two Nylon Lock-nuts (42). Figure 3 …

7, Step 1 Slide one Pillow Block Bearing (17) onto each side of the Back Rocker (5). Use two Bolts (33), four Washers (44), and two Nylon Locknuts (41) to attach each Pillow Block Bearings (17) onto the Main Frame (1). Slide Short Spacer Tube (12) into the Front Rocker (4). Attach the Front …

12, Weight Ratios 12 KPS-LP2 Ratio % Wei g ht(lbs ) 205% 10 20.5 15 30.75 20 41 25 51.25 30 61.5 35 71.75 45 92.25 55 112.75 65 133.25 75 153.75 85 174.25 95 194.75 105 215.25 115 235.75 125 256.25 140 287 155 317.75 170 348.5 185 379.25 200 410 …

1, Owner’s Manual Read all precautions and instruc- tions in this manual before using this equipment.. 215-00007 04/05 Rev B K P S -LL P 2 …

11, Assembly 11 Step 5 Start by attaching Cable (15) to Main Frame (1). See detail A below. Insert cable into Pulley A location and then attach Pulley A to Main Frame (1) using one Bolt (36), two Washers (43), and one Nylon Locknut (42). Note: Make sure cable is running through the groove o…