Kicker KX120.2 Operation & User’s Manual

1, Congratulations! You have just purchased the latest in amplifier tech- nology to carry the famous KICKER name. Your KICKER KX series amplifier is designed and built to give you years of powerful and trou- ble-free performance. This installation manual contains valuable infor- mation on how to get t…

5, 5 USING THE SIGNAL OUTPUT JACKS (PAST) The Output (Pre Amp Signal Transfer) RCA jacks allow you to send the incoming signal from one Kicker KX series amplifier to another amplifier or processor without the need for Y cables. The signal from the PAST jacks is iden- tical to the signal fed to…

8, 8  Alternator nnoise ((whining ssound tthat vvaries wwith eengine RRPM): ÖCheck for damaged RCA cable. ÖCheck routing of RCA cable. ÖCheck source unit for good ground. ÖCheck gain setting, turn down if set too high.  Poor sstereo iimage oor rreduced bbass rresponse: ÖC…

11, Kicker KX120.2 • Damage due to improper installation • Subsequent damage to other components • Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation • Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be consider…

9, 9 SPECIFICATIONS Model KX120.2 KX150.2 KX200.2 RMS Power In Watts, All Channels Driven @ 13.8V, 4Ω Stereo, 0.085% THD 30 x 2 38 x 2 50 x 2 @ 13.8V, 2Ω Stereo, 0.2% THD 60 x 2 75 x 2 100 x 2 @ 13.8V, 4Ω Mono, 0.4% THD 120 150 200 Dynamic Power In Watts, All Channe…

7, TROUBLE SHOOTING If your amplifier does not appear to be working, check obvious things first such as blown fuses, poor or incorrect wiring connections, incorrect setting of crossover switch and gain controls, etc. There are two LEDs on the end panel of your Kicker KX series amplifier, …