Kicker KX75.2 Operation & User’s Manual

5, 5 ADJUSTING AMPLIFIER CONTROLS Your Kicker amplifier has two rotary controls and one switch on the end panel. These controls ensure the reliability and performance of the amplifier, so they need to be set correctly. CROSSOVER SWITCH NEVER CHHANGE THE CRROSSOVER SWITCHH SETTING WITH THE SYS…

4, 4 System Diagrams The following diagrams show the most common configurations for your Kicker KX series amplifier. TWO CHANNEL OPERATION (STEREO) KX series amplifiers are capable of operating into a minimum impedance of 2 ohms per channel in stereo operation. GROUND REMOTE TURN-ON BATTERY…

1, Congratulations! You have just purchased the latest in amplifier tech- nology to carry the famous KICKER name. Your KICKER KX series amplifier is designed and built to give you years of powerful and trou- ble-free performance. This installation manual contains valuable infor- mation on how to ge…

7, Kicker KX75.2 7  Alternaator noise (whining sound thaat vaaries with engine RPM): ÖCheck for damaged RCA cable. ÖCheck routing of RCA cable. ÖCheck source unit for good ground. ÖCheck gain setting, turn down if set too high.  Poor stereo imaage or reduced baass response:: ÖCheck …

6, TROUBLE SHOOTING If your amplifier does not appear to be working, check obvious things first such as blown fuses, poor or incorrect wiring connections, incorrect setting of crossover switch and gain controls, etc. There are two LEDs on the end panel of your Kicker KX series amplifier, one green an…

3, 3 Wiring Instructions Signal can be input into the amplifier using either the low level RCA input con- nections or the high level (speaker level) connections. Using the low level RCA connections is the preferred method. Use the high level inputs only if your head unit does not have lo…