Kidde RF-SM-DC Operation & User’s Manual

18, approval from Kidde. Doing so will void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any…

11, breaker supplying power to the alarm circuit. If the alarms still does not sound, see the trouble-shooting guide in section 12. DO NOT use an open flame to test your alarm; you could damage the alarm or ignite combustible materials and start a structure fire. Erratic or low sound com…

1, Kidde RF-SM-DC Battery powered, wireless Smoke Alarm with SMART HUSH ® Control to temporarily silence nuisance alarms. Thank you for purchasing a Kidde Wireless Interconnected Smoke Alarm, part of the Kidde Wireless System. It is an important part of your family’s home safety plan. You can trust th…

7, Install the three (3) AA batteries in the back of the alarm. • The mounting plate must be removed from the back of the unit to install batteries. To remove, hold the mounting plate and twist counterclockwise (left). • The battery polarity markings on the bottom of the battery compartment must …

3, 1. RECOMMENDED LOCATIONS FOR ALARMS • Locate the first alarm in the immediate area of the bedrooms. Try to monitor the exit path as the bedrooms are usually farthest from the exit. If more than one sleeping area exists, locate additional alarms in each sleeping area. • Locate add…