Data: UPD 4th December 2023
Klipsch RB-51 Speakers PDF Specifications (Updated: Monday 4th of December 2023 12:04:42 PM)
Rating: 4.5 (rated by 89 users)
Compatible devices: ROOMGROOVE, Heritage Groove, RC-62, Groove, Reference Premiere RP-8060FA, RSB-8, RF-7 III, R-2502-W.
Recommended Documentation:
Text Version of Klipsch RB-51 Speakers Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 04 December 2023)
RB-51
SPECIFICATIONS
FREQUENCY RESPONSE 50Hz-23kHz ± 3dB
POWER HANDLING 75W RMS / 300W Peak
SENSITIVITY 92dB @ 2.83V / 1m
NOMINAL IMPEDANCE 8 ohms compatible
HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression
driver mated to 90˚x 60˚ square
Tractrix
®
Horn
HIGH FREQUENCY CROSSOVER 2000Hz
LOW FREQUENCY DRIVERS 5.25" (13.3cm) Cerametallic
™
cone woofer
ENCLOSURE TYPE Bass-reflex via rear-firing port
HEIGHT 11.4" (29cm)
WIDTH 6.5" (16.5cm)
DEPTH 10.75" (27.3cm)
MOUNTING Keyhole bracket and Dual 1/4"-20
threaded inserts
WEIGHT 12 lbs (5.5kg)
FINISH Black Ash woodgrain vinyl
5.25" Bookshelf Loudspeaker
Built to the same exacting standards as the
Reference Series floorstanding models, the
RB-51 represents an ideal combination of
technology, performance and design. In fact, this
well-thought-out speaker design will forever
change the way you think about audio.
Exclusive Tractrix
®
Horns have always been the
key component of this critically acclaimed series.
In the RB-51, this technology has been refined to
include improved throat geometry for a more
genuine, lifelike sound. Behind the horn lies a 1-
inch titanium tweeter with a powerful
neodymium motor structure to provide a unique
combination of precision, clarity and effortless
dynamics.
The RB-51 employs a 5.25-inch woofer for a
solid bass foundation. This Cerametallic™
woofer with inverted copper dust cap exhibits a
very high stiffness-to-mass ratio and superb
damping characteristics.
Increased baffle ribbing around the horn mouth
dramatically improves acoustics across the sonic
range. For signal purity and perfect driver
integration, the crossover on the RB-51 features
the finest components and Klipsch custom
internal wiring.
Available in a black woodgrain vinyl finish, the
RB-51 comes with a low-diffraction, magnetically
attached grille to further accentuate the elegance
of this speaker.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
• High-performance bookshelf speaker
• Rear-firing port for easy integration into cabinetry
• Tractrix
®
Horn eliminates acoustic interference from shelf installations
Recommended:
U15, CT-32SX31CE, CIC-101, Viera UT50A series
harman/kardon Go+Play, SP618-BLACK, ASBWS-0716 SoundMax, bluRock2, OM DESIGN SERIES, FH6
-
Contractor SeriesCeiling Speakerwww.daytonaudio.comWarranty InformationDayton Audio® products are constructed by industry experts, and are thoroughly tested before shipment. Dayton Audio products are warranted for the period of one year. This warranty is limited to manufac ...
Model & Doc Type: CS625C 2
-
Thank you very much for choosing the FACTOR Electronics HORN-15. Please follow these instructions carefully to ensure proper installation and operation. If you have any questions about this product please contact Factor Electronics at [email protected] Installation: 1. Careful ...
Model & Doc Type: HORN-15 2
-
Enabling standby (low power) mode Applies to: SoundTouch 30 wireless speaker SoundTouch 20 wireless speaker You can enable standby (low power) mode by removing the Ethernet cable, disabling Wi-Fi and clearing the Bluetooth® pairing list. Disabling Ethernet and Wi-Fi will prevent the s ...
Model & Doc Type: Wave radio Series III 2
-
261mmHEIGHT334mmWIDTHHARMONY BRICK WALL MOUNTING CABINETSO34 / HO34SIDE VIEW / ILLUSTRATION NO 1FRONT VIEW / ILLUSTRATION NO 2TOP VIEW / ILLUSTRATION NO 3INSTRUCTIONA. Cabinet must be mounted flush with the naked wall (asseen in illustration 1).B. To avoid creaks in the finished wall or paint u ...
Model & Doc Type: HO34 1
Operating Impressions, Questions and Answers:
