Knoll HD225 Manual, Firmware Upgrade Instructions

1, Knoll HD225 HD225 Firmware Upgrade Instructions To upgrade the projector firmware, you need the following: ♦ The M1 cable that comes with the projector ♦ A computer with an available USB port ♦ Latest firmware (Downloadable from www.knollsystems.com \Technical info\Home theater products\…

2, HD225 Firmware Upgrade Instructions 2 2. The WinZip Self-Extractor dialog box appears. Click Unzip to expand the files. The files will unzip to the default location listed in the Unzip To Folder box. 3. Click Close. Perform the projector upgrade 1. In Windows Explorer, go the…

3, HD225 Firmware Upgrade Instructions 3 The Firmware Upgrade Wizard appears. 2. Click Next. The Select File dialog box appears. click on Browse and select " Brandware_753-0374-01.BIN" and click NEXT …

4, HD225 Firmware Upgrade Instructions 4 6. Make sure you've connected the USB connector on the M1 cable to the computer. 7. To prepare the projector for the upgrade process, do the following: ♦ On the projector keypad, press and hold the Menu button. ♦ Plug in the po…

5, HD225 Firmware Upgrade Instructions 5 NOTE If the Upgrading status box shows no progress, click Cancel and try again. 9. When the upgrade finishes, click Finish. Part 1 of upgrade is complete. Part 2 of upgrade Go through the same process as Part 1 upgrade except in the "select …