Lervia LERVIA KH 1150 Operating Instructions Manual

11,  9 6.3 Installing the Light Module (E) 1 Remove the three screws with lock washers from the light module (E). 2 Connect the cable plug of the light module to the socket on the fan. 3 Insert the light into the motor housing, making certain that the opening is located under th…

14, 12  7 Operation 7.1 Setting the Speed Set the speed level with the pull chain (G) on the motor housing. Each pull changes the speed in the following sequence: Fast - medium - slow - OFF Switch the light on with the middle pull chain (F). If the fan is also switched on and off with a switch …

7,  5 2 Proper Use The ceiling fan serves exclusively for promoting circulation. This ceiling fan is intended exclusively for use in private households. Observe all information in this installation and operating manual, in particular the safety instructions. Any other use is considered i…

16, 14  10 Warranty and Service The warranty conditions and the service address can be found in the enclosed document. 11 Technical data Product: Ceiling Fan KH 1150 Mains voltage: 220 - 240 V~, 50 Hz Rated output: Fan 60 W Lights: 3 x max. 50 W GU10 Materials: Metal and MDF Dimensions: 1…

13, Lervia LERVIA KH 1150  11 2 Hang the fan in the installation plate, making sure that the mount lines up properly with the notch (see Fig.: circle). 3 Electrical connection Colour coding: Gr een-yellow (I): PE conductor Blue (II): Neutral conductor Br own (III): Current-carrying wire (also: black) Connect the e…