UNITED OFFICE A3 LAMINATOR ULG300A1 Operating Instructions Manual

1, KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.: ULG300A1-04/10-V2 IAN: 61862 A3 Laminator ULG 300 A1 A3 Laminator Operating instructions 6 CV_61862_ULG300A1_LB6.qxd 04.01.2011 11:59 Uhr Seite 1 …

8, - 6 - 9. Preparing for cold lamination  If you have previously performed hot lami- nation: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rollers inside the laminator will still be hot. These can damage the laminating …

5, UNITED OFFICE A3 LAMINATOR ULG300A1 - 3 - Overheating Protection This appliance is fitted with overheating protection. Should the motor become too hot due to excessive loading, the appliance switches itself off automati- cally. In this case, disconnect the plug from the mains power socket and wait until the appliance has …

3, - 1 - Content Page 1. Intended use 2 2. Items supplied 2 3. Appliance description 2 4. Technical Data 2 5. Safety instructions 3 6. Suitable laminating pouches 4 7. Operating levels 4 8. Preparing for hot lamination 5 9. Preparing for cold lamination 6 10. Lamination process 6 11. Anti-Bl…

9, - 7 - ➩ If you do not want to start another lamination process, turn the foil thickness switch o to ABS (OFF) and withdraw the plug from the mains power socket. 11. Anti-Blocking Switch (ABS) At the start of the lamination process, the pouch may be pulled in at an angle or jam itself inside t…