Konftel 60W Operation & User’s Manual

16, ENGLISH Accessory: Mobile cables Note: If the GSM network has reduced functionality, this may give poor coverage and affect the sound quality. This is not due to the Konftel 60W. Optimising microphone volume Adjust the microphone volume when installing the unit to ensure optimum sound quality. Unde…

21, ENGLISH Troubleshooting and maintenance Poor sound quality, echo 1. Make sure that the Konftel 60W is within your phone’s working range. 2. Check the position. The unit is designed to stand flat on the table. Avoid moving it around during the call. Do not place the unit too close to a wall or un…

11, ENGLISH Using a System phone Making a call Lift the handset, make a call and put the hand- set to one side. Switch to loudspeaker by turning on your Konftel 60W. Ending a call To end the call, replace the handset and press the On/Off button. Microphone volume control Keep the Mute button press…

9, Konftel 60W ENGLISH 7 Rejecting a call When the Konftel 60W rings, press the On/Off button for up to 2 seconds until you hear a short beep. Rejecting a second call Reject a second call by pressing the On/Off but- ton for up to 2 seconds until you hear a short beep. Transferring calls between the Konft…

20, ENGLISH I I I I I I 18 Some problems that may arise when using the Konftel 60W are described below. Connection and pairing 1. The Konftel 60W does not appear in the display when you try to add a new device to the phone. Make sure you have followed the instructions on page 3. Check…

22, ENGLISH Technical Data Konftel 60W Power supply: Transformer 12 V DC/230 V AC, 700 mA (Europe) Transformer 12 V DC/120 V AC, 700 mA (USA) Input: Analogue line in/out, modular 6/6. Rec (loudspeakers) -10 dBV (adjustable). Send (microphone) - 30 dBV (adjustable). Loudspeaker volume: Adjus…