Krell Industries RESOLUTION 1 Owner's Reference Manual

5, 1 SECTIONONE About Krell Thank you for your Resolution Series loudspeaker purchase. This section describes the Krell Legacy, Krell’s innovative loudspeaker design and technology, and defines key terms used in this reference. The Krell Legacy “I design every Krell component to…

19, Krell Industries RESOLUTION 1 15 Discrete Driver Environment All drivers in the Resolution Series operate in an ideal environment, which is designed to preserve clarity and promote an uncolored sonic presentation. To isolate the drivers from the operating pressures of the main enclosure, the Resolution 1 loudspeaker emp…

23, continued  19 Warranty Each Resolution Series loudspeaker has a limited warranty of five years for parts and labor. Should this product fail to perform at any time during the warranty, Krell will repair it at no cost to the owner, except as set forth in this warranty. This warr…

11, continued  7 20. Screw each foot/washer assembly into the four screw holes located on the bottom of the loudspeaker. 21. Spin the washers counterclockwise up the shaft of each foot to secure the foot. 22. Carefully invert the loudspeaker so that it is resting on the feet. 23. Remove the top foa…

4, iv List of Illustrations Figure 1, page 10 Resolution 1 Front and Back Panels, and Grille Figure 2, page 11 Resolution 2 Front and Back Panels Figure 3, page 12 Resolution 3 Front and Back Panels Figure 4, page 12 Resolution C Front and Back Panels Krell Resolution 1, 2, 3, a…

13, 9 3. Grasp the remaining grille block, allowing it to rest between the thumb and fore- finger of each hand. 4. Pull firmly to stretch the grille cords, until the grille locator pins align with the two grille holes on the top front of the loudspeaker. On the Resolution C, stretch the grille cord…