KUSSMAUL 091-36 Instruction Manual

1, KUSSMAUL 091-36 AUTO-TROL A CONTROL TO PROTECT ALTERNATING CURRENT LOADS FROM LOW FREQUENCY POWER INPUT Model 091-36 BOOK#091-36 INSTRUCTION MANUAL TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826 KUSSMAUL ELECTRONICS CO., INC. 170 CHERRY AVE., WES…

2, INTRODUCTION: The AUTO-TROL Low Frequency cutout relay is intended to protect A.C. loads by disconnecting them from the power source when the frequency of that power source drops below 60 Hz. This prevents excessive current draw and motor burnouts. The AUTO-TROL is a solid state …

3, TEST: 1.0 Start the engine and operate the generator at it normal speed and frequency (60 Hz). The Green LED indicator on the side of the AUTO-TROL should be lit. The relay is closed and the load energized. 2.0 Set the engine to low idle to produce a generato frequency less than 50 …

4, AUTO-TROL to 87 to 30 BLACK GROUND WHITE/RED +12 VOLTS 115 VAC LOADS Figure 1 AUTO-TROL 091-36 WIRING …

5, INSTALLATION RECORD & WARRANTY Date Installed Installed By Vehicle Identification Vehicle Owner WARRANTY All product of Kussmaul Electronics Company Inc. are warranted to be free of defects of material or workmanship. Liability is limited to repair- ing or replacing at our fact…