KYMCO 125 PULSAR - Driver Manual

21, ⌒16⌒⌒16⌒ (10) HORN/LIGHTS INSPECTION(10) HORN/LIGHTS INSPECTION Turn the ignition switch to the "ON" position and push the Turn the ignition switch to the "ON" position and push the horn button to check if it sounds. horn button to check if it sounds. Hea…

16, (3) BRAKE INSPECTION(3) BRAKE INSPECTION Ride the motorcycle at low speed on a dry road and respectively apply the front brake lever and rear brake pedal to check the brake performance. The brake lever should have proper free play. "Free play" means the d…

17, KYMCO 125 PULSAR - ⌒12⌒⌒12⌒ 2. CRACKS & DAMAGE Check the tire-contact area for crack or damage. 3. ABNORMAL WEAR Check the tire-contact area for abnormal wear. 4. FOREIGN OBJECTS OF METAL PIECE & GRAVEL Check the tires and tire-contact area for imbedded objects of metal piece and gra…

43, (2).EXHAUST EMISSION CONTROL SYSTEM MAINTENANCE OPERATION METHOD: (2).EXHAUST EMISSION CONTROL SYSTEM MAINTENANCE OPERATION METHOD: 1.Refer to page 28 for air cleaner cleaning. 2.Engine Oil In order to have hight combustion efficiency and reduce pollutants,make sure to …

30, ⌒ ⌒25⌒25⌒ (5) DO NOT MAKE SUDDEN STOP OR SHARP TURN(5) DO NOT MAKE SUDDEN STOP OR SHARP TURN Sudden stop and sharp turn are the main causes for slipping and could be very dangerous. In rainy days the road is slippery. Sudden stop will cause the motorcycle to slip. Be careful …

23, ⌒18⌒⌒18⌒ 5. ENGINE STARTING METHODS5. ENGINE STARTING METHODS (1) TURN THE IGNITION SWITCH "ON"(1) TURN THE IGNITION SWITCH "ON" Unlock the steering handlebar. Turn the ignition switch to the "ON" position. Unlock the steering handlebar…