Kyocera Mita KM-5050 Operation Manual

25, 24 KM-NET for Clients 5.10. Fax Advanced Tab Allows you to configure the advanced settings for FAX function. Main Item Sub Item Description Restriction Transmit Restriction Selects whether the transmission restriction is enabled or not. When restriction is enabled, those addresses wh…

23, 22 KM-NET for Clients 5.9. Fax Basic Allows you to configure the basic settings for FAX function. Main Item Sub Item Description Defaults FAX Firmware Displays the FAX firmware version. Local FAX Name Names your local FAX. The maximum length of the FAX name is 32 characters. Local FAX Number Regis…

2, KM-NET for Clients 1 Legal and General Information Notice Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems arising from the use of this pr…

21, 20 KM-NET for Clients 5.7. Copy Tab Allows you to configure the settings for the copying function. Main Item Sub Item Description Feed APS Media Type Allows you to give priority to the specified media type when the APS (Auto Paper Selection) mode is enabled. …

5, 4 KM-NET for Clients 2. Installation and Startup 2.1. Installation KM-NET for Clients is provided on the CD-ROM supplied with the printing system. Perform the following procedure below to install KM-NET for Clients. 1 Set the CD-ROM into the optical drive of the computer. The setup window appe…

12, Kyocera Mita KM-5050 KM-NET for Clients 11 4. Add Printing System Wizard To search for printing systems to be registered, click Add or press F3. The Add Printing System Wizard starts. 4.1. Adding the Printing Systems Using Standard Mode To add the printing systems using standard mode, perform the followi…