Fiery KM-C2030 Quick Start Manual

7, 7Preparing to print Preparing to print To set up your Fiery X3e, you must perform the following tasks: • Connect the Fiery X3e physically to a functioning network. • Configure the network server. •Set up the Fiery X3e from the Control Panel. •Prepare client workstations for pri…

6, 6 Quick Start Guide Command WorkStation (Windows only) •Windows-based computer with a 200-MHz or greater Pentium processor • 60MB of available hard disk drive space for installation •At least 2 x CD-ROM drive •A monitor that supports 16-bit color at a minimum resolution…

3, 3 About the documentation Printing the manuals The PDF files on the User Documentation CD include blank pages to allow for correct pagination with duplex printing. The CD also includes an installer for Adobe Acrobat Reader, an application that allows you to view and print the user docume…

8, 8 Quick Start Guide 3. To confirm this connection, turn on the copier/printer and the Fiery X3e and print a Test Page from the Fiery X3e Control Panel. To print a Test Page, press the Utility button on the Control Panel. In the Touch Panel, press the Controller Detail button. Press t…

1, Fiery KM-C2030 QUICK START GUIDE Part Number: 45040356 22 January 2004 2004  Electronics for Imaging, Inc. This Quick Start Guide provides system requirements and an overview of how to set up your Fiery X3e 31C-M Color Server ™ so you can begin printing. The guide de…