LA Audio Electronic BCL20 Operation Manual

12, 11 As an alternative, one can emulate such a filter, using a stereo one-octave equalizer set in such a way that the frequency response approximates that of figure 2. Fig. 2 THE BCL20 AS AN ACOUSTIC NUISANCETHE BCL20 AS AN ACOUSTIC NUISANCE LIMITER :LIMITER : This is a complementary aspect o…

4, LA Audio Electronic BCL20 3 2.0 INSTALLATION2.0 INSTALLATION IMPORTANT: PLEASE READ THIS SECTION BEFORE USING THE BCL20IMPORTANT: PLEASE READ THIS SECTION BEFORE USING THE BCL20 2.1 INSPECTION AND UNPACKING2.1 INSPECTION AND UNPACKING The BCL20 has been carefully packed at our factory in a carton designed to wi…

16, 15 DS Action DS Action 12 dB at 8 kHz Input ConnectorInput Connector XLR 3 pin balanced Output ConnectorOutput Connector XLR 3 Pin balanced DimensionsDimensions 483mm W x 190mm D x 44.5mm H 19"W x 7.5"D x 1.75"H WeightWeight 3.9kg, 8.6lbs Shipping WeightShipping Weight 4.8kg,…

6, 5 BCL20 rear view showing Channel 2 and Mains connections The input and outputs of the BCL20 are on XLR connectors. For balanced input and outputs, connections to the unit should be wired as follows: XLR +4dBu Pin 1 Screen (Signal ground) Pin 2 Hot (+ve) Pin 3 Cold (-ve) For unb…

13, 12 When this is done, one has to copy the frquency response to a graphic equaliser which is inserted in the side-chain. THE BCL20 AS AN AUTOMATIC VOICE-OVER (DUCKER) :THE BCL20 AS AN AUTOMATIC VOICE-OVER (DUCKER) : This application is useful in discotheques and radio where it provide…

7, 6 44 DESCRIPTION OF CONTROLSDESCRIPTION OF CONTROLS GAIN REDUCTION DISPLAYGAIN REDUCTION DISPLAY This 12 Led bargraph indicates the amount of compression (in dB). The law is expanded at low values. LEVEL DISPLAYLEVEL DISPLAY This 12 Led bargraph indicates either the input level or the output level a…