La Crosse WS-8349U Instruction Manual

18, La Crosse WS-8349U 18 • This product is only designed for use in the home or office. • This product is not to be used for medical purposes or for public information. • The specifications of this product may change without prior notice. • This product is not a toy. Keep out of the reach…

16, 16 TROUBLESHOOTING Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: No reception of WWVB signal Solution: 1) It may help reception to face the front of the atomic clock in the general direction of Ft. Collins, Colorado. 2) Wait overnight fo…

15, 15 2) Install three mounting screws (not included) into a wall —leaving approximately 3/16 of an inch (5mm) extended from the wall. 3) Place the atomic clock onto the screws, using the hanging holes on the backside. Gently pull the atomic clock down to lock the screws into …

4, 4 The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the segments will light up briefly before displaying the information for time, date, indoor and outdoor temperatures and indoor humidity. …

19, 19 Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment…

7, 7 2. Press and release the + key to select radio-controlled time ON or OFF. 3. Press and release the SET key to confirm the radio-controlled time setting and continue to the Language setting. Note: Turn off the radio-controlled time feature only if you DO NOT wa…