La Crosse Technology RS-204U-CS Instruction Manual

Instruction Manual for La Crosse Technology RS-204U-CS Remote Control (1 pages)

Specifications:

512/512735-rs204ucs.pdf file (18 Dec 2023)
  • Manufacturer: La Crosse Technology
  • Category of Device: Remote Control
  • Document: RS-204U-CS, File Type: PDF Instruction Manual
  • Updated: 18-12-2023
  • Count of Pages: 1
Download RS-204U-CS Manual (1 pages)

Read PDF Document Online:

Data: UPD 18th December 2023

La Crosse Technology RS-204U-CS Remote Control PDF Instruction Manual (Updated: Monday 18th of December 2023 09:42:26 AM)

Rating: 4.2 (rated by 53 users)

Compatible devices: CZ-02RT11P, BJ CONTROL PRO, PQRCVCL0Q, 99019, B051-000, DX8G2, YET027, RC-Dex.

Recommended Documentation:

Text Version of La Crosse Technology RS-204U-CS Remote Control Manual (Summary of Contents)

(Ocr-Read of Document's Main Page, UPD: 18 December 2023)


 
 
 
Remote Control Outlet System, RS-204U-CS 
 
 
 
 
 
 
 
 
 
 
 
Set-Up Instructions: 
1)  Install 2 AAA Alkaline batteries into remote control. 
Press four numbers to set security code (for example 
“1-1-1-1”). 
2)  Plug remote outlets into AC outlet. Press the button 
once. 
3)  Press the button on the remote control that you wish 
to use to control that outlet. 
 
Details on Set-Up: 
• 
When batteries are first inserted into the remote 
control, the LED light will blink steadily until a code is 
entered. When entering the code, pause briefly 
between each button press to be sure it is entered in 
as desired. 
• 
Once the remote outlet is plugged in, the LED will 
blink steadily until a button on the remote control is 
pressed. 
• 
To set up additional outlets on the same remote, 
follow steps 2 and three. 
• 
To set up additional remote controls, simply install 
batteries and set to the same code. 
• 
If the remote outlet is unplugged, you will need to 
follow step 2 and 3 again. 
• 
To set a new remote control button to a remote outlet 
without unplugging, press and hold the button on the 
outlet for about three seconds (LED will flash). Follow 
step 3 above. 
 
Options on setting up 
•  One remote control can control multiple remote outlets. 
When setting up each remote outlet, simply use the same 
remote and same number to control. For example, one 
remote control, code set to “1-2-3-4”, can be set to control 
ten different holiday lights by pressing key number “1”. 
•  Multiple remote controls can control the same remote 
outlet(s). Simply program additional remotes to the same 
code as the first. For example four remote controls can be 
placed in each corner of a large room. All of them are 
coded “2-2-2-2”. Thus, pressing key number “2” will control 
all outlets assigned to that code+number. 
•  Each remote control has four numbered keys. Four 
separate systems can be operated on each number. For 
example key number 1 controls the holiday lights on the 
tree, key number 2 controls the main floor lamp, key 
number 3 controls the electric heater, and key number 4 
controls
 
the radio. 
 
Operation: 
•  To turn on the remote outlet (and thus any device plugged 
in to it), press the corresponding ON key (left side of 
remote control). 
•  To turn off the remote outlet press the corresponding OFF 
key (right side of remote control). 
•  To turn on/off all controlled remote outlets for that remote, 
press the “master” key, ON or OFF. 
•  To turn on/off the remote outlet without the remote control, 
briefly press the button on the remote outlet. LED will be 
on when remote outlet is on. 
 
Safety Precautions: 
•  The remote outlets are not rated for any outdoor use. 
•  The remote outlet is designed for US-type plugs, 120V 
rated. 
•  The remote outlets must be plugged only into outlets that 
are properly wired and grounded. 
•  Do not use at the end of an extension cord 
•  Do not expose remote outlet or remote control to water. 
•  Allow air to circulate around remote outlet as it may warm 
up when in use. 
•  Do not use in an application where a loss or gain of power 
is critical. The remote outlet may turn on or off at any time 
due to uncontrollable interference. 
•  As with all electrical devices, keep away from children. 
• Not for medical purposes. 
•  It is advised that the remote outlet be removed from outlet 
when not in use. 
 
Specifications: 
•  Model:   
set RS-204 (one remote, two outlets) 
included RS-220 (remote outlets) 
included  RS-210 (remote control with ten buttons) 
•  Operating Voltage: 120V 
•  Operating Frequency: 60 Hz 
•  Maximum Current: 30 Amps 
•  Maximum Power: 3600 Watts 
•  Operating Temperature: 32°F to 122°F 
•  Transmission Frequency: 433 MHz 
•  Transmission Distance: 80 feet, optimal conditions 
 
Troubleshooting 
Problem:  Remote control does not operate remote outlets. 
Solutions:  Move closer to remote outlet 
  Re-program remote outlet 
 Replace batteries (and re-program) 
 
Warranty 
La Crosse Technology provides a 1-year warranty on this 
Remote Control Outlet System  
For warranty work, technical support, or information contact: 
 
La Crosse Technology 
2809 Losey Blvd. S. 
La Crosse, WI 54601 
Phone: 608.782.1610 
Fax: 608.796.1020 
e-mail: 
[email protected]
 
(warranty work) 
[email protected]
 
(information on other products) 
web: 
www.lacrossetechnology.com
 
 
Remote control 
Remote outlet 





DOC-fd90af0c:

Recommended:
VKR 1700, HG673-ZA, MCFZ-A12WV, 1630

IR-URC31, D0027-SRC-BLA, SRP3011, RM-VZ320 - Remote Commander, SRU8015
  • Philips PrestigoUniversal remote controlSRU8015Your favorite channels at your fingertipsBrowse through your favorite channels with our color icon-based universal remote! Blending technology and convenience, the Prestigo SRU8015 provides the ideal balance between screen and button control.Sing ...

    Model & Doc Type: SRU8015 2

  • SHC-S2-00 | 009-1775-00 | 181204 Copyright 2018 Savant Systems, LLC45 Perseverance Way, Hyannis, MA 02601 Savant.com | 508.683.25001 of 2Rear PanelAReset (hole)To clear all Ethernet settings and revert them back to their factory defaults, press and hold the reset button fo ...

    Model & Doc Type: SHC-S2-00 2

  • 4. When you’ve finished entering the five-digit code, keep holding down the device key and look at the POWER key. Is the POWER key on? YES: You’re done! You’ve programmed this device key. NO, it blinked four times and turned off: You have either entered a code number that is not ...

    Model & Doc Type: RCRBB04GZ 2

  • 1IR-URC31 + IR-URC32MANUAL (p. 2)Universal Remote ControlMODE D’EMPLOI (p. 7)Télécommande universelle MANUALE (p. 13)Telecomando universaleBRUKSANVISNING (s. 25)Universal fjärrkontrollMANUAL DE UTILIZARE (p. 30)Telecomandă universalăHASZNÁLATI ÚTMUTATÓ (o. 19.)Egyetemes távirányít� ...

    Model & Doc Type: IR-URC31 37

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Philips
CDR538
28 0.91 Mb 05/12
2 FUTABA
T12K
4 12/12
3 Hiltron security
TWIN
4 01/03
4 Black+Decker
BDXPA0001
21 13/04
5 Total Control
TRC-1280
21 23/03
6 Danfoss
102E7
24 25/03
7 Konftel
CRC2
3 04/04
8 One for All
URC-10820
21 27/10
9 Renkforce
RS2W
12 25/03
10 Philips
AZ2045
11 1.65 Mb 01/11

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 Samsung
DVD-P249
17 1.2 Mb 25.02.2024
2 THERMO 2000
MINI ULTRA
22 20.01.2024
3 Tripp Lite
p774-006
2 0.1 Mb 03.11.2023
4 Honeywell
RPWL3045A
1 1.84 Mb 14.10.2023
5 Parkside
PSBM 500 A1 - 7
61 1.75 Mb 17.03.2024
6 Blackberry
Mini Stereo Speaker
15 2.22 Mb 29.11.2023
7 CANARY AUDIO
C900
10 10.04.2024
8 OHAUS
TP200S
116 21.02.2024
9 Coolmax
PS-124
1 0.22 Mb 12.04.2024
10 MTD
140-669
20 26.01.2024
Operating Impressions, Questions and Answers: