Lab.gruppen PLM Series Operation Manual

59, PLM Series Operation Manual 59 APPLICATION GUIDE 12 12.1 I/O Panels System interconnection on-site is made quicker and simpler if racks are prewired internally to connection panels. If the panels are fitted to the front of the rack, all audio, loudspeaker, network and powe…

37, PLM Series Operation Manual 37 9.13 Menu Mode 9.13.1 Menu View Menu Module Input Cfg Attenuation Dante Load mon. Frame Prst Frame Figure 9.13.1: Menu mode view Most PLM operating functions are accessed via the menu system in MENU mode. These include adjustment of gain, sele…

26, 26 PLM Series Operation Manual When a PLM-specific loudspeaker type is loaded, its load characteristics are included. The load characteristics are stored in a file with a “.mdl” suffix and is loaded with the module file with the same name. The PLM’s LoadSmart and SpeakerSa…

18, 18 PLM Series Operation Manual 7 OPERATION AND PERFORMANCE 7.1 Introduction to Operation This chapter provides comprehensive information on PLM Series connection, setup, operation and performance. The detailed information included here is essential to realizing the full functionality …

16, 16 PLM Series Operation Manual 6 QUICK GUIDE OVERVIEW Please contact [email protected] for further information on bridge-mode operation. Binding posts In this version, the power outputs for loudspeaker connection are available on four separate pairs of fully-enclosed bi…

7, Lab.gruppen PLM Series PLM Series Operation Manual 7 WARNINGS 3 3.3 User Responsibility 3.3.1 Mains connection grounding Your PLM must be connected to a grounded socket outlet. 3.3.2 Speaker output hazard PLMs are capable of producing hazardous output voltages. To avoid electrical shock, do not touch any e…