Data: UPD 7th October 2023
Lava Computer 16550 UARTs Computer Hardware PDF Datasheet (Updated: Saturday 7th of October 2023 01:42:33 AM)
Rating: 4.5 (rated by 45 users)
Compatible devices: Parallel Bi-directional, LAVA SSerial-PCI/LP, LavaPort-Quad, LAVA SSerial-PCIe, LAVA Dual Parallel-PCI, HQ-ST Plus, LavaPort 650, 2SP-PCI.
Recommended Documentation:
Text Version of Lava Computer 16550 UARTs Computer Hardware Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 07 October 2023)
PCI Bus
Dual Serial Board
with 16550 UARTs
and powered serial ports
LAVA
DSERIAL-PCI Powered
!
!
!
!
!
!
!
!
!
!
Dual 9-pin high speed 16550 UART serial ports – adds t wo COM ports to any PCI-equipped PC.
Maximum data throughput rate: 115.2 kbps on each port.
Power supplied on pins 1 (12 VDC) and pin 9 (5.0 VDC); other lines
supplied: RX, TX, GND, CTS, RTS.
Amperage on powered pins: 1.25 amps per port @ 20 degrees
nominal temperature polyfused.
Requires only one system IRQ – saves valuable resources for other expansion cards.
Both ports share one PCI bus IR Q – even when accessed simultaneously.
Automatically selects next available IRQ and COM addresses – just plug it in and go!
Includes Lava Com Port Redirect Utility for renaming COM Ports – allows for backward compatibility
with software that supports COM 1-4 only.
Compatible with RS-232 serial peripherals – including PDAs, digital cameras, bar-code scanners, and
UPSes.
Compliant with PCI Specification 2.2 5.0 volt PCI; 3.3 volt PCI for PCI-X slots also available.
Lava Lifetime Warranty
LIFETIME
WARRANTY
2 VULCAN STREET, TORONTO, ON CANADA M9W 1L2
LAVA COMPUTER MFG INC.
TEL:(416) 674-5942
www.lavalink.com
FAX:(416) 674-8262
Lava:"TheSourceForPorts"
Rev. B01
Features:
LAVA
Board
by:
IO
/
1 2 3 4 5
6 7 8 9
#1 12 VDC
#2 Receive Data (RX)
#3 Transmit Data (TX)
#4 not used
#5 Signal Ground/Common (GND)
#6 not used
#7 Request to Send (RTS)
#8 Clear to Send (CTS)
#9 5 VDC
Recommended:
MEW5524AS0, EN3601MOX, DT-31RI, 86HS-1
EK-UNI RAD, 8800 Series, M68HC08, XETK-S4.2, SH-GE90
-
1. IntroductionOnce you have soldered the headers your board is ready to be placed into desired mikroBUS™ socket. Make sure to align the cut in the lower-right part of the board with the markings on the silkscreen at the mikroBUS™ socket. If all of the pins are aligned correctly, pu ...
Model & Doc Type: Adapter click 2
-
All disclosures, notices and warranty conditions are being written on the back of the box. Released on 22th of March, 2011. Installation and mounting manual for EK-FC590 GTX water block This product is intended for installation only by expert users. Please cons ...
Model & Doc Type: EK-FC590 GTX 2
-
01 02QUICK START GUIDENVIDIA® QUADRO® Thank you for choosing the NVIDIA® Quadro® graphics card. This quick start guide covers the NVIDIA Quadro M6000 Series, M5000, M4000, M2000, K6000 Series, K5000 Series, K4000 Series, K2000 Series, K1200, K600 Series, and K420 graphics cards. Bef ...
Model & Doc Type: Quadro 2
-
• Öffnen Sie das Gehäuse Ihres Computers und nehmen Sie den Gehäusedeckel vorsichtig ab.• Suchen Sie einen freien PCI-Express-Steckplatz, entfernen Sie das zugehörige Slotblech und stecken Sie die Karte in den PCI-Express-Steckplatz ein. Schrauben Sie die Steckkarte fest, kontrollie ...
Model & Doc Type: 1614192 4
Operating Impressions, Questions and Answers:
