LeCroy WaveJet 300A series Getting Started Manual

45, WaveJet 300A Series 44 WJ-A-GS-E Rev A Period Triggering Source lets you choose a channel input or an external input. Select positive or negative polarity. Coupling modes comprise AC, DC, HF Reject, and LF Reject Select Interval Time to …

10, Getting Started Manual WJ-A-GS-E Rev A 9 CAT I Installation (Overvoltage) Category rating per EN 61010-1 safety standard and is applicable for the oscilloscope front panel measuring terminals. CAT I rated terminals must only be connected to source circuits in which measure…

39, WaveJet 300A Series 38 WJ-A-GS-E Rev A VERTICAL SETTINGS AND CHANNEL CONTROLS Choosing Coupling To select an input coupling mode, turn on the channel whose coupling you want to change by pressing the appropriate channel button. Select Coupling from page 1/2 of the…

44, Getting Started Manual WJ-A-GS-E Rev A 43 Pulse Width Triggering Source lets you choose a channel input or an external input. Select positive or negative polarity. Coupling modes comprise AC, DC, HF Reject, and LF Reject Select Pul…

16, Getting Started Manual WJ-A-GS-E Rev A 15 SPECIFICATIONS Vertical System Bandwidth (-3 dB @ 50 ohms): WJ354A 500 MHz WJ352A WJ334A 350 MHz WJ332A WJ324A 200 MHz WJ322A WJ314A 100 MHz WJ312A Input Channels: 4 (WJ354A/334A/324A/314A); 2 (WJ352A/332A…

31, LeCroy WaveJet 300A series WaveJet 300A Series 30 WJ-A-GS-E Rev A Vertical Controls OFFSET -- Adjusts the vertical offset of each channel individually. VOLTS/DIV -- Adjusts the volts/division setting (vertical gain) of the channel selected. CHANNEL BUTTONS -- If the channel is already ON, t…