Lexicon DC-1 Owner's Manual

36, Lexicon 28 System Configuration Speaker Distance The Listener Position menu is used for setting the surround and center delays and calibrating the Panorama effect. Setting Listener Position Mute Level Power On Volume Zone 2 Power On Volume This menu allows you to set the level of at…

27, 19 DC-1 Version 4 Digital Controller System Configuration PCM Only NOTE: PCM ONLY is automati- cally selected for an input when- ever ANALOG is selected as the AUDIO IN setting, as AC-3 and DTS effects are incompat- ible with analog inputs. If PCM ONLY is selected as the FX FORMA…

42, Lexicon DC-1 35 DC-1 Version 4 Digital Controller PCM Effects and Parameters 3 Panorama PCM Effects and Parameters Parameter Initial Value Range INPUT BALANCE (Centered) Full Left-Full Right CENTER LEVEL 4 0-15 REAR ROLLOFF 4.9kHz 453Hz-20.0kHz REAR DELAY 10ms 0-32ms SURROUND LEVEL 12 0-32 BASS CONTENT MONO ST…

57, 50 Lexicon AC-3 Effects and Parameters SURROUND EX (available as of software version 4) extracts and repro- duces the additional rear channel mixed into SURROUND EX encoded soundtracks. This parameter is automatically set to ON when both SIDE and REAR speakers are selected in the SPEA…

19, 11 DC-1 Version 4 Digital Controller System Configuration 2 System Configuration Restore Factory Defaults Although the DC-1 memory is cleared before it leaves the factory, it is good practice to restore the factory defaults with the following procedure before system configuration. Turn the DC-…

6, Lexicon Using DC-1 Effects .......................................................... 32 Customizing Effects • Comparing a modified effect to the factory preset version • Restoring the original parameter values of an Effect • Naming your custom Effect • Restoring the original Effect N…