Lexmark CX310 series Compatibility Manual

118, • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper handling problems. • Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F) without releasin…

138, Media specifications Labels Width: 76–216 mm (3–8.5 in.) 1 Length: 124–356 mm (4.88–14 in.) 1 Weight: Up to 180 g/m 2 Paper (48 lb) Up to 180 g/m 2 Dual Web Paper (48 lb) Up to 220 g/m 2 Polyester (59 lb) Up to 300 g/m 2 Vinyl (92 lb) Thickness: 0.13–0.20 mm (0.005�…

175, Driver edge For printers that use a fixed reference for feeding paper through the paper path (as opposed to printers that center paper in the path), the edge of the print material that is positioned next to the hardware reference and that is driven by the rollers in the printer. For most Lexmark …

174, Lexmark CX310 series Glossary Adhesive contamination Migration of adhesive away from a label, which can cause printer contamination. Also known as glue contamination. Anvil cuts Cuts that penetrate both the face stock and the liner of a label. Auto compensator A gear‑driven pick arm suspended by a counterbala…

36, Card stock and label guidelines When printing on labels: • Use only paper labels. Do not use vinyl labels. • Use only label sheets that have no gaps between the labels. Acceptable labels Unacceptable labels • Recommended labels are Avery 5260. • From the printer control panel or …

10, We recommend that you condition stock while it is still in the original wrapper. To condition stock, store it in the same environment as the printer for 24–48 hours before printing to let the stock stabilize at the new conditions. You may need to extend this time by several days if t…