Lexmark CX510 series Operation & User’s Manual

147, Confidential Print menu Use To Max Invalid PIN Off 2–10 Set a limit on the number of times an invalid PIN can be entered. Notes: • This menu item appears only when a formatted, working printer hard disk is installed. • When the limit is reached, the print jobs for that user nam…

168, Use To Background Removal ‑4 to 4 Adjust the amount of background visible on a scanned image. Note: 0 is the factory default setting. Color Balance Cyan - Red Magenta - Green Yellow - Blue Enable an equal balance of colors in the scanned image. Color Dropout Color Dropout None Red Green Blue…

136, Universal Setup menu Use To Units of Measure Inches Millimeters Specify the unit of measure. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3–8.5 inches 76–215.9 mm Set the width for portrait orientation. Notes: •…

47, Lexmark CX510 series 2 If the paper is longer than letter‑size paper, then squeeze and then slide the length guide at the back of the tray to extend it. 2 1 3 Squeeze, and then slide the length guide tab to the correct position for the size of the paper being loaded. 2 1 1 Note: Use the paper size indicators on…

178, Use To Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0–255 Default Green Threshold 0–255 Default Blue Threshold 0–255 Specify which color to drop during scanning and to adjust the dropout setting for each color threshold. Notes: • None is the factory …

119, Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into t…