Lexmark T656 Manual 

225, 227Operations - TN5250E SETUP: SCS OPTIONS > MISC SETTINGS > Output Bin (IDB Option 115) Output Bin (IDB Option 115) This SCS Options > Misc Settings option selects the paper output bin. The setting will trigger definitions made by the Destination Drawer (DSTDRW) command. User IDB comman…

10, Lexmark T656 12Understanding the Operator Panel: Printer operator panel When you select an option, you will always be alowed to scroll through the list of values presented. Numerical entries can be done either by scrolling or by using the numeric pad. Several examples of how to use the operator …

284, 286Appendix - TN3270e IDB Commands: List of Commands 2 <CSC><CSC> Double CSC (prints <CSC>) 1 <CSC>{XY} Single transparent character Refer to the chapter on Understanding the Control Panel (page 10) if necessary. Precedence Command Comments …

302, 304Appendix - SCS TN5250eFont Table: Set Substituted Font ID Parameter: Example: 1 - 249 SETSUBFNT 86 NOTE: Font 86 needs to be present in the font table prior to this command. The entire font definition (incl. string before/after etc.) is transferred to font table position 3. For instan…

101, 103Operations - TN3270E SETUP: NETWORK SETUP > SERVER INFO > Keep Alive Time Keep Alive Time This Network Setup > Server Info option specifies the time in sec- onds that expires between each keep alive signal sent to the host or SNA gateway server. The Keep Alive Type setting s…

222, 224Operations - TN5250E SETUP: SCS OPTIONS > MISC SETTINGS > Top Margin (IDB Option 108) Top Margin (IDB Option 108) This SCS Options > Misc Settings option defines the top margin in lines. The line height depends on the setting of the LPI (IDB Option 105) option. User IDB co…