Lexmark T656 Technical Reference Manual

54, Lexmark T656 Two-dimensional bar codes 51 number of rows used to build the symbol will be determined by the “codewords:columns” ratio. For example, if columns is set to 10, rows is set to 0, and the symbol requires 80 codewords, the symbol will be built with 8 rows (80 codewords / 10 columns…

49, One-dimensional bar codes 46 8 Bar/Space Width Units int 0=default (1/600” units) 1=1/300” units 2=1/600” units 3=1/1200” units • 0 or 2 (dec) or • 00 or 02 (hex) Optional. Specifies units for Bar and Space widths. 9-10 Bar Width #1 [int int] 12-24 (dec) or 00 0C-0…

152, Common error messages 149 Errors common to all symbologies String errors String errors result from bad input data and represent the most commonly encountered errors. The following table shows the string errors possible for each symbology. Error Code Error Description 1 Unexpected Error 2 NULL…

128, Supported Bar Codes 125 German Postal 2 of 5 Leitcode YYYYY 2 A modified 2 of 5 bar code used by the German Post (Deutsche Post AG) for parcels to encode the receiving post office and the destination address and a check digit. Japan Post 4-State bar code YYYYY 2 Similar to RM4SCC ex…

149, Forms Print Errors 146 ParseLFM FormInformation malloc failed. Insufficient memory Add memory to printer. ParseLFM malloc failed. Insufficient memory Add memory to printer. PDFlib error <%s> at PDF API <%s> Internal Error Contact Lexmark Service. PDFLIB failure. Intern…

16, One-dimensional bar codes 13 • Other than the default value, you must explicitly specify the characteristic values. If no value is specified, the default value is used. Previously specified non-default values are not retained. • To print additional bar code data with the same character…