Lexmark Pinnacle Pro901 Network Manual

8, Ethernet networking Information you will need to set up the printer on an Ethernet network To configure your printer for an Ethernet network, organize the following information before you begin: Note: If your network automatically assigns IP addresses to computers and printers, continue on t…

19, Lexmark Pinnacle Pro901 switch A device similar to a network hub that can connect different networks together UAA (Universally Administered Address) An address assigned to a network printer or print server by the manufacturer. To find the UAA, print a network setup page and look for the UAA listing. This is also known …

4, Item Description SSID (name of your wireless network) Security key (WEP key or WPA passphrase) You must know your security information. You cannot configure the printer for a secure wireless network without security information. This information is unique to your network, and you o…

14, 3 Press Enter or click OK. The Command Prompt window opens. 4 Type ipconfig, and then press Enter. Check the Wireless Network Connection section: • The “Default Gateway” entry is typically the wireless access point . • The IP address appears as four sets of numbers separated…

7, Adding the printer to your wireless network 1 Set up your printer for wireless networking using the setup instructions provided. Stop when you are prompted to select a network. 2 If there is an association/registration button on the back of your box, press it before selecting a network. Not…

6, For Macintosh users 1 Close all open software applications. 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 3 Double-click Install. 4 Select My printer is already set up. I am installing it on a new …