Lexmark XM1100 Series Operation & User’s Manual

282, Streaked horizontal lines appear on prints ABCDE ABCDE ABCDE Action Yes No Step 1 a Depending on your operating system, specify the tray or feeder from Printing Preferences or the Print dialog. b Resend the print job. Do streaked horizontal lines appear on prints? Go to step 2. The problem is s…

318, This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.” Limited warranty Lexmark warrants that this product: —Is manufactured from new parts, or new …

270, Action Yes No Step 1 a Check if there is packing material left on the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Check if the packing material is properly removed from the imaging unit. Warning—Potential Damage: Do not expose the imaging unit to direct…

271, Action Yes No Step 1 a Move the width and length guides in the tray to the correct positions for the paper loaded. b Resend the print job. Is the page or image clipped? Go to step 2. The problem is solved. Step 2 From the printer control panel, set the paper size and type in the Paper…

190, Lexmark XM1100 Series Sides (Duplex) 1 sided 2 sided Specify whether prints are on one side or on both sides of the page. Note: “1 sided” is the factory default setting. Duplex Binding Long Edge Short Edge Define binding for duplexed pages in relation to the page orientation of the printed document.…

91, 3 From the home screen, navigate to: Copy > enter the number of copies > Collate > select the preferred order of pages > > Copy It Placing separator sheets between copies 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass…