Lexmark MX710 Series Operation & User’s Manual

67, 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 5 Load the paper stack with printable side facedown for one‑sided printing. Note: Make sure the paper or envelope is loaded properly. One‑sided prin…

294, Solving print problems Printing problems Confidential and other held jobs do not print Note: Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra memory to process additional held jobs. Action Yes No Step 1 Open the held jobs folder on the printer displa…

252, Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Reports, and th…

280, Remove defective disk [61] Remove and replace the defective printer hard disk. Remove packaging material, [area name] Remove any remaining packaging material from the specified location. Remove paper from standard output bin Remove the paper stack from the standard bin. Replace all original…

264, 2 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove tray 1 to clear duplex. [235–239] 1 Pull out the tray completely. Note: Lift the tray slightly, and then pull it out. 1 3 2 2 Push down the front duplex flap, then firmly…

56, Lexmark MX710 Series c Press Enter, or click OK. 3 Click Install, and then follow the instructions on the computer screen. For Macintosh users 1 Close all open applications. 2 Insert the Software and Documentation CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop…