Lexmark Pro4000 Series Quick Reference Manual

29, Scanning ADF Scanner glass Use the ADF for multiple‑page documents. Note: The ADF is available only in select printer models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. Use the scanner glass for single pages, small items (such as…

14, Using the printer control panel 1 2 3 4 5 6 7 Use To 1 Power • Turn the printer on and off. • Switch to Sleep mode. Note: When the printer is on, press to switch to Sleep mode. Press and hold for three seconds to turn off the printer. 2 Display Note: The display is turned off in …

11, Lexmark Pro4000 Series • To add a space, press the number 0. Fax Name Fax Name Enter Fax Name and press OK 22 Configure other advanced fax settings later in the software installation. Continue Configure Advanced Features You can now print, but there are additional steps required to access all the features of your …

55, Wireless troubleshooting If you are having trouble setting up your printer on a network, then print a network setup page, and then see the comprehensive User's Guide available on the installation software CD. Also, make sure to check the network indicator lights to verify the …

45, You can find these WPS logos on the side, back, or top of your access point. For more information on accessing the wireless settings and determining the WPS capability of your access point, see the documentation that came with the access point or contact your system support person. Configur…

51, C HECK THE USB CONNECTION 1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one. 2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. …