Lexmark T630 User's Reference Manual

123, 123 Identifying the print media path Accessing jam areas Open doors and covers, remove trays, and remove options to access jam areas. The illustration shows the location of sources and possible jam areas. 5-bin mailbox, rear door Output expander, rear door (High-capacity output sta…

133, 133 23x Paper Jam 4 Open the duplex rear door. 5 Look under the duplex rear door for the edge of the print media to determine how the print media is jammed: • If only a short piece of print media is visible toward the rear of the printer, do not pull it out; it may be easier to access from ins…

89, 89 Replacing the print cartridge 3 Hold the print cartridge by the handle and insert it into the printer. Align the tabs on each side of the print cartridge with the slots on each side of the print cartridge cradle. 4 Slide the print cartridge into the printer until it snaps into place. 5 Close th…

135, 135 23x Paper Jam 232 Paper Jam Check Duplex and 233 Paper Jam Check Duplex Note: To resolve the message, you must clear all print media from the print media path. 1 Open the duplex rear door. 2 Look under the duplex rear door for the edge of the print media to determine how the print medi…

59, Lexmark T630 59 Using and loading the multipurpose feeder 4 Prepare the print media for loading. • Flex paper or fan envelopes back and forth. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges and avoid touching the print side. Fan the stack …

51, 51 Loading print media in standard and optional trays 5 Place the print media into the tray with the recommended print side face down for single- sided printing and face up for duplex printing. Do not fill paper above the load line. Overfilling the tray may cause jams. 6 Squeeze the width guide tab…