Lexmark T430 Manual, Technical Reference

262, PostScript 4-48 Page Device Parameters In addition to the page device parameters described in Section 4.11 of the PostScript Language Reference Manual (Third Edition) by Adobe Systems, Inc., the following page device parameters are used by setpagedevice and currentpagedevice. Certain …

225, Lexmark T430 PostScript 4-11 Envelope Tray Support If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the envelopetray operators listed in “Table 4-5: Envelopetray Operator Selections” on page 4-12, the printer: • Sets the PageSize Policy…

149, PJL 3-33 LIMAGEENHANCETYPE Image Enhancement Technology Type 2, 4, AUTO 2, 4 (Model specific) LIMAGEORIENTATION Page Image Orientation DONOTROTATE, ROTATEPAPER, ROTATEENVELOPES, ROTATESTAPLED, ROTATESTAPLEDANDENVELOPES, ROTATEALL DONOTROTATE Note: The factory default is …

129, PJL 3-13 CPLOCK (DEFAULT only) Disables menus ON, OFF ON disables the printer operator panel menus. OFF enables menus. OFF DENSITY Print Darkness 1 to 5 To determine the default value of your printer, see “Table B-1: Common Variables for Both Printer Languages” on page B-1. 2, 3, 4 (Model sp…

331, Specifications 7-5 Altitude Specifications Atmospheric Pressure 74.6–101.3 kPa (560–760 mmHg) Table 7-5: Humidity Ranges Printer Model Operating Value Shipping/Storage Value T430, T430d, T430dn 8 –80% 8–95% T640, T642, T644 8 –80% 5–95% W840 8 –80% 5–100% Table 7-6: Printer…

111, PCL 2-99 Run-Length Encoded Data Run-Length Encoded Data is interpreted in pairs of bytes. The first byte: • Acts as a counter, or control byte. • Indicates how many times to repeat the data in the second byte. • Can be from 0 (no repetition) to 255. • The second byte is the data byt…