Lexmark X215 Service Manual

80, Lexmark X215 3-14 Service Manual 4038-001 Print Quality Pages test This function prints a variety of test pages used to verify print quality. There are seven different test patterns. To perform the Print Quality Pages test: 1. Press Menu, #, 1, 9, 3, 4. The LCD screen displays TECH. 2. Press Menu, and …

130, 4-42 Service Manual 4038-001 Main feed roller solenoid removal 1. With the card cage and main drive assembly removed. See “Card cage removal” on page 4-25 and “Main drive assembly removal” on page 4-37 for more information. 2. Remove the gear plate (A). …

39, Diagnostic information 2-7 4038-001 Paper Jam 1 The fuser exit sensor sensed the leading edge of the page but never sensed the trailing edge. • Go to the paper path diagram “Printer engine paper path/ paper jams” on page 5-15 to see the region where a paper jam may occur. •…

31, General information 1-9 4038-001 Cleaning the photoconductor drum If there are streaks or spots on your print, the photoconductor drum may require cleaning. The operator panel menu includes a Clean Drum option that may help to improve the print quality. To clean the photoconductor drum: 1.…

35, Diagnostic information 2-3 4038-001 Document Jam Paper was sensed at the ADF registration sensor, but not at the ADF scan sensor. • Make sure the ADF scan sensor actuator is not broken, improperly installed or stuck with paper debris. • If the paper path and sensor actuator a…