Lexmark N8050 Operation & User’s Manual

12, Using the Wireless Setup Utility 8 10 Verify that the print server can communicate over the network. • If the print server was successfully configured and is available on the network, click Finish to close the Setup Utility. • If the print server was not able to join the wireless net…

29, Certification ID: W003404 This certificate represents the capabilities and features that have passed the interoperability testing governed by the Wi-Fi Alliance. Detailed descriptions of these features can be found at www.wi-fi.org/certificate Certification Date: Mar…

14, Using the Wireless Setup Utility 10 3 Click OK to return to the Advanced Mode home screen, and continue with step 7 of the advanced mode instructions. • If PEAP is selected as the authentication mechanism: 1 Enter an appropriate username and password for the 802.1x–RADIUS auth…

2, ii Edition: May 2005 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED W…

13, Lexmark N8050 Using the Wireless Setup Utility 9 5 Select the appropriate encryption for the network. The type of encryption that can be used is dependent on the authentication type that was selected in step 4. For Open: • No Encryption • WEP For Shared: • WEP For WPA Personal: • TKIP Fo…

20, My network printer does not print 16 My network printer does not print • Make sure the printer power is on. • Check the printer status. • Make sure the network is operating properly. See the network documentation, or contact your network support person if you are not sure that your networ…