Lexmark E120 Manual, Quick Reference

8, Canceling a print job 8 From a Windows computer 1 Click Start Æ Settings Æ Printers. 2 Double-click the printer being used to print the current job. A list of print jobs appears. 3 Right-click the current document, and then click Cancel. From a Macintosh computer When a job is s…

5, Lexmark E120 Loading paper or other print media 5 Loading Tray 1 1 Open the paper cover by lifting up until the cover clicks into a fully open position. 2 Adjust the slide and attached backstop to the length of the selected print media. Note: To decrease width, push in on the left guide. To in…

2, Understanding the Operator Panel 2 Light sequence Primary light sequence Secondary light sequence Message Ready / Data Error Ready / Data Error Ready / Power Saver Busy Waiting Cancel job / Reset printer Flushing buffer Invalid engine code (Ready / Data light blinks once) Not…

11, If you need more information 11 5 Pull the front door up until it clicks into an open position, and remove any lodged print media. Note: It may be necessary to remove the toner cartridge and place it on a flat, clean surface to reach print media lodged behind it. Replace the toner cartridge w…

1, Quick Reference 1 Quick Reference Understanding the Operator Panel The printer operator panel has two buttons and two lights. Lights indicate the status of the printer. Buttons are used to continue or cancel the current print job. When the printer is turned on, both lights cycle as a self…