Lexmark C750 User Reference Manual

92, 90 Print Jobs on Disk What this message means: Jobs that were spooled to the hard disk before the printer was last turned off have not yet printed. What you can do: • Press Go to print the jobs. • Press Return or Stop to delete the jobs from the hard disk without printing them. Printing…

131, 129 39 Infrared Menu Use the Infrared Menu to change printer settings affecting jobs sent to the printer through an infrared port. Select a menu item for more details: Note: Values marked by an asterisk (*) are the factory default settings. • Infrared Buffer • Infrared Port �…

187, 185 Paper Size Purpose: To identify the default paper size for each paper source. For trays with automatic size sensing, only the value detected by the hardware is displayed. Values: First select a paper source: Then select a value (*denotes country-specific factory default values): N…

51, Lexmark C750 49 24 Ordering supplies and maintenance items In the U.S. or Canada, call 1-800-438-2468 for information about Lexmark Authorized Supplies Dealers in your area. In other countries, contact the place where you bought your printer. You can also visit the Lexmark online store at ww…

39, 37 16 Solving option problems Symptom Cause Solution The option does not operate correctly after it is installed, or it stops working. The option is not installed correctly. Remove the option, and then reinstall it. Cables connecting the option to the printer are not attached correctly. Check th…

27, 25 10 Linking trays • If you load the same size and type of paper or specialty media in more than one tray, the printer automatically links the trays. This means that when one tray is empty, it feeds from the next linked tray. For example, if you have the same size and type of paper or special…